The summer season has finally arrived, and so has the time to beat the scorching heat by installing a new split air conditioner at home. But before you do that, it is important to keep in mind certain guidelines for the successful AC installation Leander, TX.
Keep reading to leave out all your doubts and get the best out of your dollars!
- Get the Right Size for Your Room
The most important factor in a successful split air conditioner installation is to get the right size machine for your room. A unit that is too small will not be able to cool your room properly, while an extremely large unit will cool your house too quickly and shut off before all the humidity is removed from the air.
Whether you want to install it in your bedroom, drawing-room or office, make sure that you know the room’s dimensions beforehand. Do this by measuring the length and width of the room in feet, then consult an HVAC specialist to help you select the right size system for your property.
- Check the Voltage Requirements
Proceeding with AC installation Leander, TX, can be hazardous without checking the voltage requirement. If the voltage is too low, it can damage the AC unit, and if the voltage is too high, it can cause a fire.
The idea here is to make sure you are using a unit compatible with your home’s electrical system. You can find this information in the product manual or on the manufacturer’s website. Consult with an electrician if you’re unsure whether your home’s electrical system can handle a new air conditioner.
Installing a new AC unit without checking the voltage requirement can be dangerous and may void your warranty. So always err on the side of caution.
- Keep the Indoor and Outdoor Units Level
Leveling the air conditioning unit is important to ensure it functions properly and cools your home evenly. If the indoor and outdoor units are not level, the air conditioner will not be able to draw in enough air – eventually reducing its cooling capacity and efficiency.
Good leveling also ensures the refrigerant lines and drainage tubes are connected properly. Failure to do so can cause these tubes to become kinked or crimped, which would affect the AC’s performance. Plus, it will be easier for you to clean them later on.
- Do Not Install the Unit in a Corner
While it may be tempting to install the outdoor unit of your split air conditioner in a corner to save space, it is not recommended. There are a few reasons for this:
- The unit will be less effective at cooling the room since it will be blowing air directly into a corner and not out into the room.
- The unit will be more difficult to clean and maintain
- The unit may create an uncomfortable draught in the room.
During AC installation Leander, TX, make sure the outdoor unit has at least a foot of clearance on all sides and that the area around it is free of debris such as leaves and twigs.
- Do Not Block the Air Vents
After installing your split air conditioner, it is important to ensure that the vents and grilles are not blocked. If they are, it will restrict the airflow and reduce the unit’s efficiency.
There should be at least a foot of clearance on all sides of the outdoor unit, and the area around it should be free of debris such as leaves and twigs.
- Do Not Install the Unit Near a Heat Source
When an air conditioner is placed near a heat source, such as a furnace or clothes dryer, the warm air surrounding the unit will be drawn into the AC, which causes your unit to work harder and results in less efficient cooling. It is also one of the main culprits why air conditioners freeze up or short cycle.
But if this is not possible, make sure there is plenty of space around the unit during AC installation Leander, TX, for proper airflow and try to keep the area surrounding it as cool as possible.
- Leave Space for Maintenance and Repair
As any HVAC specialist will tell you, one of the most important considerations when installing a split air conditioner is to leave enough space for maintenance and repair. Over time, the system will accumulate dust, dirt, and other debris. This will reduce the efficiency of your AC unit and may cause it to break down.
Regular maintenance on your AC unit will prolong its lifespan, and if something goes wrong, it will be easier (and less expensive) to do repairs.
A DIY Job May Seem Simple, But There Are Risks
Let’s put it this way: unless you are an HVAC professional, split AC installation Leander, TX, is not a job that we would recommend doing yourself. It may seem simple enough, but many things can go wrong, and the risks are just not worth it.
Hiring a professional to install your air conditioner may cost more upfront, but it will save you money and headaches in the long run. Not to mention, it will give you peace of mind knowing that your AC has been installed properly and is covered by a warranty.
But if you’re determined to install the unit yourself, make sure you do your research and understand all the risks involved. Improper installation can void your warranty, damage your air conditioning system, and even be dangerous.
What to Expect During Your Split AC Installation
If you’ve decided to hire a professional for your split AC installation Leander, TX, here’s what you can expect:
- The technician will start by doing a load calculation to determine the size of the air conditioner required for your home. It will take into account the square footage of the space, the number of windows, the insulation, and other factors.
- Once the size of the unit has been determined, the technician will select the best location for the outdoor unit. It should be in a shady spot – away from any heat sources and with enough clearance on all sides for proper airflow.
- The HVAC pro will then install the outdoor unit, which involves mounting the split AC system to a wall or pad, connecting the refrigerant lines, and ensuring the unit is level and secure.
- Once the outdoor unit is installed, the technician will move on to the indoor unit. This involves mounting the unit to the wall, connecting it to the outdoor unit via refrigerant lines, and making sure everything is sealed properly.
- Now that both units are installed, the technician will test them to ensure they are working properly. The process involves checking the refrigerant levels, testing the airflow, and making sure the thermostat is working properly.
- Finally, the technician will show you how to operate the unit and answer any questions you may have about maintenance or troubleshooting. Split air conditioner installation is a fairly straightforward process, but it’s always best to leave the job in the hands of an expert.
You can expect your split AC installation Leander, TX, to take anywhere from a few hours to a full day. The type of system you have, the size of your home, and the job’s complexity will all play a role in how long it takes. However, most installations can be completed in a single day.
The Different Types of Split AC Units Available
One good thing about split air conditioners is that they come in various styles and sizes. This gives you the ability to choose the ideal product, whether you need a small wall-mounted unit or a larger floor-standing model.
- Ducted Split AC Units
Ducted split air conditioners are designed for larger homes and commercial spaces. These units are usually installed in the attic or crawl space and then connected to ductwork that runs throughout the home or business.
- Ductless Split AC Units
If you’re looking for a split air conditioner that is both efficient and stylish, a ductless unit may be ideal. It is available in a variety of styles, including wall-mounted, ceiling-mounted, and floor-standing models.
- Central AC Units
Central AC units are another option to consider, especially if you already have ductwork installed in your home. They work by circulating cooled air through a system of ducts and vents.
There are also a variety of brands to choose from when it comes to split air conditioners, each with its own unique features. Some brands even offer units that can be controlled via smartphone or tablet.
Need Help Choosing the Right Split AC Unit for Your Home?
If you are still on the verge of deciding which type of split AC unit is right for your home, we can help. Convent Air Conditioning & Heating’s HVAC experts can help you choose the perfect unit for your needs and budget. We can also handle the process for AC installation Leander, TX, from start to finish.
All you have to do is drop us a call at (512) 980-9738, and we’ll be more than happy to assist you!